The S110 SoftDevice v7.0 brings a range of new features including Over-The-Air Device Firmware Upgrade (OTA-DFU), concurrent Peripheral and Broadcaster roles, support for concurrent multiprotocol Bluetooth low energy and 2.4 GHz RF proprietary operation, and compliance with the latest version of Bluetooth wireless technology (Bluetooth v4.1) allowing end products using the S110 SoftDevice to be qualified to the Bluetooth standard.
The nRF51 Series SoCs' flash-based architecture and the S110 SoftDevice's OTA-DFU feature support a flexibility to firmware upgrades that is not possible on alternative static ROM/OTP-based ULP wireless SoCs. Now the nRF51822 and nRF51422 SoCs' stacks and application firmware can be upgraded quickly and easily using the devices' own wireless link. The OTA-DFU feature allows complete application and protocol stack upgrades and is not limited to just partial updates and patching. When using OTA-DFU, firmware upgrades can be delivered in a variety of ways depending on the chip's use case.
In addition, the S110 SoftDevice v7.0 is now able to handle concurrent multiprotocol Bluetooth low energy and 2.4 GHz RF proprietary communication. During concurrent protocol handling, Bluetooth low energy operates from the S110 SoftDevice itself while the 2.4 GHz proprietary protocol runs from the application space. The S110 SoftDevice manages all radio scheduling through application programming interfaces (API).
Concurrent multiprotocol protocol software handling opens up a range of possibilities for designers while also benefiting end users because they will no longer be forced to make hard choices between these two technologies when purchasing wireless accessories or peripherals.
Concurrent Peripheral/Broadcaster roles is another feature of the latest S110 SoftDevice. This feature allows the nRF51 series SoC to broadcast data whilst in a connected state.
S110 SoftDevice v7.0 alpha release is available from the week of April 14, with full production release available in May 2014.